New product: PowerDIN 4PZ

Basic specifications of PowerDIN 4PZ

•  LAN or WiFi connection, NFC configuration
•  WEB interface
•  Channels 1, 2: metering + relay
•  Channels 3, 4: relay contacts
•  OPEN API: MQTT-flex, Modbus/TCP, Telnet, JSON, XML, SNMP, ..
•  ZCS – Zero-current switching
•  Mobile app: NETIO Mobile2 (Android)
•  Service: NETIO Cloud

I/O - Relay outputs & Digital inputs for S0 / momentary switch (Dry contact)

Metered power outputs 1 and 2 are two independently-metered 230V channels. They can be switched on and off with a built-in ZCS relay.

• Measurements: A, W, Wh, TPF, V, Hz
• Switching: Relay (ZCS)
• Max voltage / current: 230V / 16A AC

Relay outputs 3 and 4 are general-purpose NO/NC relay contacts that can be controlled remotely. These two outputs do not support ZCS, and are not connected to the supply voltage.

• Measurements: none
• Switching: Relay 
• Max voltage / current: 230V / 2A AC, 48V / 2A DC

Digital inputs In1 and In2 can be used to connect dry contacts and monitor them using the Open API. In addition, each input includes an S0 pulse counter for monitoring a water meter, an electricity meter or a similar meter.

Typical applications

• The PowerDIN 4PZ LAN/WiFi electricity meter is typically used for electricity metering and distribution in a DIN electrical cabinet.
• Remote energy consumption monitoring in one or two circuit branches.
• Connecting the pulse output of a 3-phase electricity meter to In1 or In2 in order to measure electricity consumption above 16A.
• Each output can be switched on/off or power-cycled (e.g. to restart all appliances connected to the same circuit branch) from the web interface or the NETIO Cloud service.
• Controlling the charging of e-bikes, boats and other appliances up to 3.6 kW (230V/16A). 
• Controlling the outputs using Open API (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...)